USER MANUAL FOR VACUSLIM 48 PRODUCTS

 

How are Vacuslim 48 products used?

 
     
 

1. When your client is ready for treatment, measure the weight and circumference, mark the measured areas and note the values on a worksheet.

2. Cream the standing person with Vacuslim 48 Thermo Slimming Serum 1 by applying cream from knee to under the chest (upper abdomen). Protect their hands with gloves.

3. Then apply Vacuslim 48 Slimming & Firming Cream 2, which has a cryogenic effect and feels pleasant on the skin, to the treated areas. You can treat arms or upper arms in the same way.

4. Pull the Vacuslim 48 bag from the bottom to the chest. Close the top of the bag under the breast with an elastic band. Let the customer lie on the couch, now close the lower part with a cable tie to prevent air from entering (it is important that the legs and feet are in a straight position).

5. The elastic band must not be laced too tightly in the abdominal area, and the bag should be pulled up to the area below the chest or 5 to 7 cm above the navel. Make sure that the elastic band is not laced too tight. If the person has a larger waist size, you can also attach two Velcro straps.

6. Insert an extension of the manual vacuum cleaner into the bottom part of the bag and suck all air out of the bag to create a vacuum. Cover the treated person and leave him/her lying still for 30 minutes so that all the active ingredients of the Vacuslim 48 preparation reach their maximum effect.

7. After 30 minutes, remove the Vacuslim 48 bag and remove the excess liquid on the skin with a towel. Then apply Vacuslim 48 Anti-Cellulite & Firming 3 Oil for a light massage for five minutes.

8. Then measure again the weight and circumference of the person in the previously marked areas.

 


 


 
 

The Vacuslim 48 treatment is ideal for improving the appearance of the arms and upper arms. In order for the treatment to achieve the best results, eliminate side effects and firm up the sagging skin of the arms, proper adherence to work protocols is necessary.

Before you start treating the arms, measure the circumference of the arms in centimeters, mark the measured areas and note the values on a worksheet.
 

 
  1. Apply Vacuslim 48 Serum 1 and then Vacuslim 48 Cream 2 to the arms of the treated person, in the upper arm area (between elbow and shoulder).  Gently massage into the skin (no intensive rubbing is required).

2. Wrap the arms of the treated person in the Vacuslim 48-Hand Bag arm bags.

3. Close the Vacuslim 48-Bag lightly with an elastic band in the upper arm area. Do not pull tight, it is sufficient if the elastic band keeps the bag closed.

4. Close the bottom part of the bag with a cable tie and suck the air with a vacuum cleaner to create a vacuum.

5. After 3 minutes, remove the rubber band from the upper arm. Leave the bag still close to the upper arm. Do not hold the rubber band for more than 3 minutes as this is sufficient to activate the active ingredients from the preparation.

6. Leave the arms wrapped in this way for up to 30 minutes.

7. Remove the Vacuslim 48 bag and do a short massage with Vacuslim 48 Oil 3.

8. Then measure the circumference of the person's arms again at the previously marked points.
 		  
 
Recommendation:
The Vacuslim 48 treatment should be carried out every other day, 6-12 treatments in total.
Treatments should be repeated until the person is satisfied.
Remind the treated person of the importance of regular care at home, with home care products such as Vacuslim 48 Thermo Slimming Serum 1 roll on and Vacuslim 48 Slimming & Firming Cream 2. 

 		  

Back